TOYOTA 1KD FTV EURO 4 Common Rail Fuel Injector 095000-7780 for Hilux & Prado - Improve Engine Performance & Fuel Efficiency for Off-Road & Daily Driving

PART NUMBER INFORMATION

Part No: 095000-7780

Alternate Part No: 095000-7781

Previous Part No: 095000-7540

Replaced Part No: 095000-7030, 095000-6760

OEM Part No: 23670-30280, 23670-39315, 23670-39316

Replaced OEM Part No: 23670-30140, 23670-39185, 23670-39186

VEHICLE INFORMATION 

Manufacturer: Toyota

Application: Passenger Vehicle (PV)

Model: Hilux

Series: KUN16R, KUN26R

Engine: 1KD-FTV

Displacement: 3.0L

Emissions: Euro 4

Year: 08/2006-07/2009 **

Fuel Type: Diesel

Manufacturer: Toyota

Application: Passenger Vehicle (PV)

Model: Prado

Series: KDJ120, KDJ150

Engine: 1KD-FTV

Displacement: 3.0L

Emissions: Euro 4

Year: 12/2007- **

Fuel Type: Diesel

** Please contact Denco Diesel & Turbo with either the genuine OEM part number sourced through the OEM dealer, the part number off the original injector or your vehicle identification number (VIN) to confirm the injector is correct for your vehicle prior to purchase. Vehicle year model should be used as a guide only.

INJECTOR INFORMATION

Brand: Denso

Model: G2

Pricing: Per injector

Condition: Denso X-change

Precision built for exact replacement and tested to strict OEM standards.

The injectors supplied come with 12 months warranty and after sales service.

CORE DEPOSIT: $55 PER INJECTOR (INCLUDED IN PRICE)

A of $55 per injector has been included in the final amount and will be refunded on the return of your original injector(s).

WHY DENSO X-CHANGE?

• Denso remanufactured injectors are subjected to testing that far exceeds the voltages and temperatures experienced in vehicle conditions to ensure quality standards are achieved.

• The compensation coding is generated using the same process as is carried out for new injectors; Denso software provides the correct Denso unique code for that injector.

• Injectors are processed in batches; 2 out of every 30 injectors are randomly selected by Denso and sent to Japan for quality checking. One injector is dismantled,checking the quality of repair with the other injector tested using factory equipment to ensure the correct coding has been assigned. Once this quality assurance testing has been performed the batch is then released to the market.

• The Denso calibration code that is generated for the injector must be accepted by the ECU. The vehicle manufacturer specifies the criteria and Denso calibration coding must meet this specification to ensure that emission regulations, power and economy standards are achieved. Only Denso remanufactured injectors can achieve these stringent standards.

REQUIRED INFORMATION

Please provide in the comments ALL part numbers stamped on the side of the injector body or full vehicle information (i.e. make, model, production date) so the correct injectors are dispatched.Ensure that you have supplied all of the requested information prior to fitment of the supplied injectors as if the injectors are not correct they will not code into the ECU. If injectors are fitted they cannot be returned for refund.

CODING COMMON RAIL INJECTORS

The supplied common rail injectors require coding to each cylinder by an authorised workshop that hosts the correct diagnostic equipment.

ASSOCIATED PRODUCTS

Washer Kit (complete)

Washer Kit (leak-off only)

Injector Driver Unit -

RELATED PAGES